PS2 Engine with conventional transformer

Gary,

Until I do (in a few weeks) while I run it with my conventional Lionel KW transformer, should I expect the directional control to work like a conventional E unit?

Yes, although you need a full charged battery to get it out of neutral.

There is cab chatter, and something about very low fuel level. Is that a roundabout way of the unit telling me the battery needs charging?

LOL!  

No, it's just cab chatter that kicks in when the engine sits idle for a period of time.

Everything that you need to know about DCS is all in MTH’s “The DCS Companion 3rd Edition!" This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store!

Everything that you need to know about DCS WiFi is all in MTH’s “The DCS WiFi Companion 1st Edition!" This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store! Get the free TMCC & Legacy Addendum here!

Set voltage about 10-12 V and use the direction but which interrupts power to change direction.  Setting throttle to 0 is not always 0 volts with Lionel transformers.  Depending on year this engine may need a new battery.  If it does not play shutdown cycle completely when you turn track power off, time to charge or replace battery depending on age of battery.  G

Thanks, Barry, and thanks, GGG!  Barry, I already have the book!  Very helpful.