Installing a new PS3 tender board, AE1000E30 in a Premier Big Boy. There was no board installed when I received this locomotive. Does the 2 pin connector stay unconnected? or does it plug into the jumper plug on the tender board?
The locomotive runs DCS and is 3 rail, Product number of the locomotive is: 20-3518-1E.
I can find no reference for it.
Bruce
Replies sorted oldest to newest
The only 2 pin connector in the tender harness should trace back to the DCS/DCC switch. There should be a jumper on the PS3 tender board near the rectifier. Unplug it and plug the 2 pin connector in.
thanks will do.
From one of your previous topics https://ogrforum.com/...9#127704036770848379 , answer by @gunrunnerjohn
@gunrunnerjohn posted:The jumper is P77, it's to the left of the 4-pin plug labeled TRACK. If that jumper is not installed, you are in DCC mode. You need the jumper to run in DCS mode.
Access to this requires an OGR Forum Supporting Membership
