R2LC Help

RKV RailroadOGR Forum Member

I bought a wreck off ebay for parts but to my surprise it had a Train America DC Command Board. The problem is the screw for the R2LC was backed all the way to the top does anyone know how many turns down it has to go (the baord has JH written on it and a sticker that reads R2LC-84)

Thanks

Bob

1/15/124:37 PM

❤️ 0

Original Post

Replies sorted oldest to newest

FlashOGR Forum Member

Screw?
I'm not aware of any screws on a R2LC board.
If there is one it probably shouldn't be messed with.

1/15/126:04 PM

❤️ 0

RKV RailroadOGR Forum Member

It's a set screw on the receiver. It needs to be "set" properly. The kid who trashed the original wreck probably also messed with this.

1/15/127:08 PM

❤️ 0

chuckOGR Forum Member

Are you sure you don't have an LCRU? Those did have a coil but you were never supposed to play with it's settings. The ones I've run across were plugged with silicone sealant.

1/15/127:12 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!