Railsounds 5.5

Need to be careful what your talking about.  R2LC C xx are TMCC.  R4LC S XX are Legacy.  Yes ERR uses the R4LC hardware, but it software for TMCC and a C08 code.

Typically S02 and 3 are Legacy R4LC boards and would not work with TMCC motor drivers like ERR Cruise CDR.  G

Thank you for the info.  The R4S3 "works" in the Cruise Lite but not purely; I get random results so I suspect the Cruise Lite will not "play" well with the R4S3 or S2.  Bottom line just be happy with RS5 or RS4 and a TMCC R4 or R2.  Was trying to get Leg sounds into this upgrade; appears I have to use a Leg DCDS + R4S3 + RS5.5 for all to play well.  Thanks so much; Falcon70

Picture of the board to see the label would help, but I have not been able to get TMCC cruise motor drives to work with a Legacy R4LC.  Can't say I ever tried it with an ERR CC.  But Legacy code is transmitted in a different format and it is not suppose to work.  8 bit versus 9 bit I believe.  G

George, will take some pics of what I am using and what I may have to do for full Leg sounds; thanks much; Falcon