Skip to main content

1 reply

rcs track

CS Chuck SartorOGR Forum Member DIGITAL SUBSCRIBER

The #4 terminal doesn't sound right. Are you sure it's not the #3 terminal for the power supply? In other words, it's the number 3 wire in the controller harness that gets connected to the fixed voltage. The #3 terminal on the track nothing gets connected to it. Also power to the track must be connected to the track correctly, A to the center rail, U to the outside rail. If these connections are reversed the track will not work correctly.

Last edited by Chuck Sartor

Add Reply

Views: 64
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×