For some reason I'm no longer able to READ when more than one PS2 engine is on the track..."NO ACTIVE DCS ENGINES". Engines all READ fine when alone. All batteries fully charged. Track Signal is 10. Ver 4.10. Any ideas very much welcomed.
Jim B.
Replies sorted oldest to newest
Jim,
The emssage NO ACTIVE DCS ENGINES jkust means that all of your engines are in the Inactive Engine List, it's not an "error" message, just a statement of fact.
In order for an engine to be "READ" by DCS, it must be already in the remote and sitting on a powered track connected to a TIU that the remotes knows about.
Ensure that the TIU's DCS ID# is present in the remote. Learn the TIU's ID# by counting how many times the red LED blinks when you power it up. Then, when you press READ, see if the TIU that the remote is looking for, is that number.
Jim,
The emssage NO ACTIVE DCS ENGINES jkust means that all of your engines are in the Inactive Engine List, it's not an "error" message, just a statement of fact.
In order for an engine to be "READ" by DCS, it must be already in the remote and sitting on a powered track connected to a TIU that the remotes knows about.
Ensure that the TIU's DCS ID# is present in the remote. Learn the TIU's ID# by counting how many times the red LED blinks when you power it up. Then, when you press READ, see if the TIU that the remote is looking for, is that number.
Access to this requires an OGR Forum Supporting Membership
