Howdy folks,
I stumbled upon an eBay listing depicting a RealTRax to FasTrack solution. I figured I'd go to my LTS buy the parts and give it a try. I'm using A RealTrax to tubular track adapter (newer model) connected to a FasTrack to tubular adapter. Not exactly what I was hoping for but this will allow for greater flexibility in my overall design.
Cheers!
~MattS
![IMG_0408[1]](https://ogrforum.com/fileSendAction/fcType/0/fcOid/12270977812479340/filePointer/12270977812528592/fodoid/12270977812528589/imageType/LARGE/inlineImage/true/IMG_0408%255B1%255D.JPG "IMG_0408[1]")
![IMG_0408[1]](https://ogrforum.com/fileSendAction/fcType/0/fcOid/12270977812479340/filePointer/12270977812528592/fodoid/12270977812528589/imageType/LARGE/inlineImage/true/IMG_0408%5B1%5D.JPG "IMG_0408[1]")
Replies sorted oldest to newest
Matt;
Just for info, you can cut any piece of Fastrack anywhere you want, then easily drill out the soft plastic nubs inside the hollow rails, then standard O gauge track pins will fit. So a cut piece of Fastrack will mount directly to your Realtrack-O adapter.
Rod
I have done that (as pictured), but didn't like the looks of it, and after owning tons of realtrax, have decided I don't like that either. I abandoned fastrack idea early on. Wish I had all Atlas - it's cool, many simple combinations, but too expensive to start over.
Access to this requires an OGR Forum Supporting Membership
