I've not gotten into trains to the extent yet to know enough about how to remove my K-Line GG1 outer shell to check the TMCC battery. Can't find any info about it on the web either. Can someone please help me with a few hints. I don't want to start removing all the screws on the frame to find out I didn't need to.
Thanks.
Replies sorted oldest to newest
As I recall, K-Line has either six or eight screws to secure the shell, they should all have the same appearance. On some K-Line locomotives there is a plate with the name and flathead screws, others will be pan head screws. I believe it should be obvious which screws they are, they're near the edge, and obviously not the small ones next to a switch. 
gunrunnerjohn posted:As I recall, K-Line has either six or eight screws to secure the shell, they should all have the same appearance. On some K-Line locomotives there is a plate with the name and flathead screws, others will be pan head screws. I believe it should be obvious which screws they are, they're near the edge, and obviously not the small ones next to a switch.
Ah, got them. Thanks.
It's 6 on the GG1 I think (Been a while since I've had mine off.), but they are the biggest pan head screws you see.
Access to this requires an OGR Forum Supporting Membership
