How does a Cab-2 (or Cab-1) communicate to an SC-2? We are having some issues at the club since we moved the SC-2's. Both locations are within a foot from the track, just on the other side. The layout is about 8X20. The one thing that was changed is they were mounted vertically , now horizontally on a shelf.
Thanks
Replies sorted oldest to newest
Mine work best with power from a transformer that has U connected to the base U terminal...like an engine basically.
cjack posted:Mine work best with power from a transformer that has U connected to the base U terminal...like an engine basically.
Chuck, thanks for your reply. Something has changed for us. When we slide the drawer out that has the SC-2's mounted on, they won't respond to the cab-2. Does the signal come through the common/ground rail or though the cab-2 antenna?
It's like an engine where the U terminal is connected to it whereas the engine wheels sit on the U connected rail and the antenna receives from the ground wire in the building wiring. The antenna in the SC-2 is along the top inside of the case. Laying a ground connected wire (like connected to pin #5 on the base DB9 socket) along the top of the case helps immensely.
Thanks again. I need to check the wiring Thursday.
Access to this requires an OGR Forum Supporting Membership
