Hi Everyone I have a Lionel Big Boy 4014 6-11104 and the cab lights don't come on now so I was trying to turn them on using the Aux2 button and I some how turned off the tender red marker lights and the backup light and I don't know how to turn them back on. If I put them locomotive into program and do a reset will that turn them back on? If someone has any ideas how to help me with this please let me know. They were working before I tried to turn on the cab lights. Thanks
Replies sorted oldest to newest
Hold the AUX2 key down for three seconds, the secondary lighting menu should come up.
You can try a reprogram, this is on page 23 of the User's Manual for 6-11104
Thanks John I open the tender shell and found one of the wires to the switch had come off so I soldered it back on and everything works now. I appreciate you getting back to me on this. Gary
@gunrunnerjohn posted:Hold the AUX2 key down for three seconds, the secondary lighting menu should come up.
You can try a reprogram, this is on page 23 of the User's Manual for 6-11104
I just repaired an E-Unit on a smoking locomotive. John, I stand in amazement for the stuffyouo have stored in that head of yours. and AND, that's even if you remember where to go look for the answer!!
Technology, so kewl.... so hard, steeep learning curve. well, back to the test track.. Forward. Stop. Neutral. Check whistle. Reverse. Repeat <salute> Mr. John
Access to this requires an OGR Forum Supporting Membership
