My engine was working fine, I wonder if I have accidentally changed a setting
The Horn and Bell work fine but the diesel engine sound has disappeared ?
I have seen posts talking about a reset, might this work, but I don't know the reset code for this engine
Bear with me guys I am new to TMCC and to be honest having used MTH DCS for some years I am finding it comparatively tough to get TMCC locos running correctly, I clearly have a learning curve here
Replies sorted oldest to newest
Check the switch for RS/SS, if it's in Signal Sounds you just get the horn and the bell.
If it isn't the switch and you are using the cab1 TMCC control you may have unknowingly turned the sounds off with the cab1. To turn them back on try this. Address the locomotive. Press the AUX1 then 3 to turn the sounds back on. If they aren't loud enough press the 1 key until they're loud enough.
Hope this helps.
Ron
Access to this requires an OGR Forum Supporting Membership
