Skip to main content

Replies sorted oldest to newest

While doing some dusting through the display cases I rediscovered some accessories  in storage since a long time. A Kibri lamp post, I think from 1935,

IMG_8845IMG_8846

A little hand lantern from Marklin also from the thirties, the regular lamp inside will geave you an idea of the size. The battery compartment is on the back, unfortunately the type of battery used is not available since a very long time but an adaptation of an existing model could be made and will be made......

IMG_8834

And a piece to identify, I would say Marklin but not sure. Missing a small signal on the base. There is a great number of variations on this type of accessories, they are hand painted so not always the same and different manufacturers made them.

IMG_8831

Have a nice weekend, Daniel

 

 

Attachments

Images (4)
  • IMG_8845
  • IMG_8846
  • IMG_8834
  • IMG_8831

Hornby France made a series of smaller trains in their Series M. The publisher/printer of books for collectors Hachette issued a serie of replicas of the Hornby trains with an accompanying booklet. These Hachette trains were made from material that was some 40% thinner and lighter then the original, so they might look good but are rather flimsy. Moreover their clockwork mechanism, which has plastic gears, does not have any running capabilities. Here is a Hornby locomotive (rear) and a Hachette replica; My Hornby version is from before 1950 and does not have cilinders and rods and has a fixed key.

As you can see the Hachette does look good and new, but it does not have the feel.

The Hachette version is clearly marked; note the different mechanisms:

Here you see the Hornby version (in blue and in red) running; the Hachette does not run.

Regards

Fred

Attachments

Images (4)
  • mceclip0
  • mceclip1
  • mceclip2
  • mceclip3

Yes Fred the Hachette's are a great mimicry of the original Horby's as far as asthetics goes, but they are sadly lacking in material and motive power, either running way fast unladen or barely moving at all with a load .

I am currently trying to supplement my collection with some original French Hornby ...

Latest is a STEF refrigerated van

On the lookout for some nice locos

Last edited by Fatman

As a follow up to Daniel's interesting lamps here is another one. At the semi-annual TCA Eastern Division meet in York, PA little treasures sometimes lie almost hidden on tables crowded with boxes of locomotives, cars and a thousand other more common accessories. On Thursday afternoon found this unique tinplate tall double lamp post in the outdoor area at the "Holidome." It has a crank mechanism that adjusts the height of both lamps simultaneously. Made by Bing, it's destined for the layout at home.

P1210502P1210503P1210504

Attachments

Images (3)
  • P1210502
  • P1210503
  • P1210504
Jim Kelly-Evans posted:

As a follow up to Daniel's interesting lamps here is another one. At the semi-annual TCA Eastern Division meet in York, PA little treasures sometimes lie almost hidden on tables crowded with boxes of locomotives, cars and a thousand other more common accessories. On Thursday afternoon found this unique tinplate tall double lamp post in the outdoor area at the "Holidome." It has a crank mechanism that adjusts the height of both lamps simultaneously. Made by Bing, it's destined for the layout at home.

P1210502P1210503P1210504

I do like those Bing lamps. WP_20190411_22_10_46_ProWP_20190411_22_11_06_ProWP_20190411_21_55_39_ProWP_20190411_22_07_53_Pro

Attachments

Images (4)
  • WP_20190411_22_10_46_Pro
  • WP_20190411_22_11_06_Pro
  • WP_20190411_21_55_39_Pro
  • WP_20190411_22_07_53_Pro

George,

I'd leave it shiny brass.  It gives the caboose a certain panache.

You may remember that last week I posted photos of some American  Flyer stations.  I realized that I had a station stored in the wrong box and it took me some time to remember why.

One clue is the silvery button on the long sides of the building that you won't find on typical examples of this station.

Once you take the roof off it becomes apparent what is unique about this station.

This is a factory error.  Those tabs that are sticking up are supposed to be on the bottom of the building to hold it to the base.  Someone put the walls of the building in the stamping machine incorrectly.  One of those Monday or Friday errors.

American Flyer was creative however.  They found a way to fasten the building to the base.

And if you have sharp eyes I think you will recognize that they used a siderod to form the tab into the base.

Have a Great Tinplate Weekend.

Northwoods Flyer

Greg

Greg J. Turinetti posted:

George,

I'd leave it shiny brass.  It gives the caboose a certain panache.

You may remember that last week I posted photos of some American  Flyer stations.  I realized that I had a station stored in the wrong box and it took me some time to remember why.

One clue is the silvery button on the long sides of the building that you won't find on typical examples of this station.

Once you take the roof off it becomes apparent what is unique about this station.

This is a factory error.  Those tabs that are sticking up are supposed to be on the bottom of the building to hold it to the base.  Someone put the walls of the building in the stamping machine incorrectly.  One of those Monday or Friday errors.

American Flyer was creative however.  They found a way to fasten the building to the base.

And if you have sharp eyes I think you will recognize that they used a siderod to form the tab into the base.

Have a Great Tinplate Weekend.

Northwoods Flyer

Greg

Actually, that variation is more common than one would think.  I have seen several of these stations with the rivet at the center of the building.  However, I have not taken a close look at the inside.  

Have gotten lucky lately with a few finds....

Bing American Market: Pennsylvania Lines 529 Maroon Observation Car, New York Central Lines 253 Green Passenger Car.Bing US Marktet NYC PRR

 

Bing NYC 253Biny PRR 529

 American, UK, and German Markets checked. Thatโ€™s not even breaking it down, however, between passenger and freight. Canadian is next I guess...

Bing trains US UK German Markets

As to be expected, look nice with some Ives...

Ives & Bing

Attachments

Images (5)
  • Bing US Marktet NYC PRR
  • Bing NYC 253
  • Biny PRR 529
  • Bing trains US UK German Markets
  • Ives & Bing

First, my utmost apologies for creating a duplicate of this thread. Didn't realize that it had already been created or that there was a designated creator. I meant to put a "Please Delete-Duplicate thread" as the title for my topic but it had already been changed. My apologies to the board and @Chris Lonero

 

Here are some cast iron accessories I got from my Grandfather's collection, a cast Iron floor train,(unknown maker?), a Hubley Crash car, what I assume are 2 Hubley cast iron fire engines(horse drawn) and a tinplate wind-up that is obviously not complete made by Oro-Werks(Branenburg- has BR under "Oro") tin toy. Probably a part of a fire engine/truck. Can't recall who made the motorcycle.

Cast Iron train is labeled #40(loco & tender). Hublet crash car and motorcycle(unknown) on the left. Fire engines on the right.

FloorTrain Cast Iron 2

Oro werks wind-up on the left behind is the unknown cast iron motor cycle make

Floor Train Cast Iron 1

Iron art IM316 car in front of the floor train. In the back is a large :Slush: red car with white wheelsCast iron with cars

Attachments

Images (3)
  • Floor Train Cast Iron 1
  • FloorTrain Cast Iron 2
  • Cast iron with cars
Last edited by StevefromPA

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×