Hello all,
What is everyone using for pantographs? I have a set of MU cars that are missing the pantograph.
I checked lionels website and found the PN 6201327014, but in not available. Any ideas?
Thanks!
|
Hello all,
What is everyone using for pantographs? I have a set of MU cars that are missing the pantograph.
I checked lionels website and found the PN 6201327014, but in not available. Any ideas?
Thanks!
Replies sorted oldest to newest
I've wanted to upgrade the pantographs on some Williams Metroliner MU's.
Someone has suggested MTH or AtlasO AEM7 pantographs, and may have actually used them in a project.
I know that European tinplate manufacturer Merkur has two styles of pantograph in their catalog, but getting ahold of some here in the US may a bit of a challenge (I'm not aware of any US-based distributor/s). Plus it's still an unknown if their attachment layout is in any way compatible with the Williams one.
There's always scratchbuilding in brass, but that takes actual skill, and I've only actually built some crude inboard-bearing trucks for first-gen Williams Amfleets. (plus securing a supply of adequate springs could be challenging)
---PCJ
I have some pantographs for the short GG1 and the scale ones for the Interurbans made around 1991
Email in profile...
Marty
I have a few Lionel pantos you can have if you like.
I have been using Precision Scale pantographs. No garish toy here, they really look like the real thing.
Fantastic upgrade.
Tom Tee posted:I have been using Precision Scale pantographs. No garish toy here, they really look like the real thing.
Fantastic upgrade.
Those are nice; I tend to use the older ones from IMP that have the porcelain insulators that they sold for all those boxcabs years ago. Also have a few sets from Overland that I picked up very cheap once upon a time -- got almost all that I use off eBay as well back when they were both plentiful and cheap!
CTSRapid posted:I have a few Lionel pantos you can have if you like.
Hello,
I tried to contact you,. but no email is listed. please send me a email at NJTorqueracing@gmail.com
Thanks!
I offered up the one pantograph I have for your needs, Brasseurs, a Forum sponsor has the Kline ones on their site part #K27002 says needs lionel spring 2332-806 also has the insulators...
Marty
One specific note regarding Pantographs :
IF you actually use the Pantograph for drawing power from the overhead wire, do what all of us at the Eastbay Model Engineers Society did many years ago... Fasten the Pantograph to the car roof with tiny "dress snaps".. This way, if the Pantograph snags something in your wire work it doesn't like, your wire will NOT get torn apart and ruined ! Instead, the Pantograph will get knocked off the car onto the layout ! Think about it !!
Ken Shattock
aka Key Route Ken...
Access to this requires an OGR Forum Supporting Membership