Skip to main content

Replies sorted oldest to newest

AMTrack:

I had to do research for a customer - see attached

From first page

Power supply feeds 24 VAC into a light hub which converts it into 16 VDC.

Just Plug Light Hubs can be powered with either DC or AC power. We recommend using 16-20VAC or 24VDC. If a lower AC or DC voltage is used, the light may be dimmer. Do not exceed 20VAC or 24VDC.

Lights use 3 VDC. At the ends of each light are resistors that convert the 16 VDC to 3 VDC.

Problem – no on/off switch

Attachments

amtrack5899 posted:

What is the woodland scenics plug n play power supply rated at ? I need a 10 to 18 volt ac power supply . I wood like to tie into the woodland scenics system.

I have a ZW-L.  I have 1 channel at 13 volts to operate my Woodland Scenics as well as other buildings using incandescent bulbs.  Really works well.  I also add Nano or stick on lights powered by extra sockets on their boards inside the buildings.  13 volts gives a soft warm light.   Like stated earlier, more voltage, more brightness.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×