Skip to main content

Thinking about trying to get Alco S-2's  units done in 2 rail.  Any interest?  what roads do u like.

Here's 16 roads that had them, that I like..SP, SF, PRR, NYC, MILW, CNW, NKP, D&H, NH, GN, NP, SP&S, NYSW, LNE, CV, BCK...

Last edited by Beth Marshall-The Public Delivery Track
Original Post

Replies sorted oldest to newest

I'd be interested in a PRR S series switcher but as others have said, only if it is geared for scale speed running using a single horizontal motor drive (like in the AtlasO Sw7/9 or Sunset's diesels), and has fixed pilots.  I don't care for twin vertical motor drives as one of the motors intrudes into the cab and typically the models have low torque motors, small flywheels, and are geared for very high speed running.  I understand Lionel produced an Alco Switcher with a decent horizontal drive several years ago - but only in 3 rail.  

FYI... Lionel's most recent ("Legacy") Alco S switchers and especially their NW-2 / SW-7s have a single motor with shaft drive.  The drive in the SWs is more logically engineered than the one in the Alcos.  Whether it's better than the vaunted cassette drive in the Atlas SW switcher is hard to say.  It has more moving parts than the Atlas (it's design is similar to a current Sunset 3rd Rail diesel), and its performance as sold is bolstered by high-resolution electronic speed control.

Even on straight DC, I'm pretty sure these would out-perform a 10:1 vertical can motor drive.  They would be a great addition to 2-rail O, IF the manufacturers (or their subcontractors / licensees) were willing.  My $.02

Last edited by Ted S

Depending on the specifics, I'd be interested in two in Central Vermont.  The specifics would need to include a single horizontal motor drive.  I'd really prefer straight DC, but if push came to shove, I'd accept ESU Loksound.  No smoke.  I'm presuming this project is about 2-railing either MTH or Lionel versions, rather than new tooling.  If so, I would prefer the Lionel.  I'd really prefer Atlas, as I'm not interested in either DCS or Legacy, or TMCC, but I'm guessing we aren't talking about new tooling.

Jim

S1 and S2 had Blount trucks.      S3 and S4 had AAR trucks.    S1 and S3 were 600 HP or so, S2 and S4 were 1000 HP.    S3 and S4 superseded the S1 and S2 models respectively.

So if an an S2 is indeed offered as suggested it should have Blount trucks not AAR trucks.    And it should have the bigger radiators for the S2 and other appropriate details.

I would be game for a New Haven ALCO S-1 or S-2 in the New Haven's older orange and dark green script herald scheme as well as a Santa Fe ALCO S (whatever) in the Zebra stripe scheme and an SP ALCO S (whatever) in the tiger-stripe scheme.

At the risk of ranting, I believe that the long-term future of O scale involves modules, public set-ups and locomotives smaller that the massive Electro-Motive and GE six-axle road-switchers that dominate the rails today.

prrjim posted:

S1 and S2 had Blount trucks.      S3 and S4 had AAR trucks.    S1 and S3 were 600 HP or so, S2 and S4 were 1000 HP.    S3 and S4 superseded the S1 and S2 models respectively.

So if an an S2 is indeed offered as suggested it should have Blount trucks not AAR trucks.    And it should have the bigger radiators for the S2 and other appropriate details.

Blount or Blunt? I thought the truck was a Blunt truck, and the guy that started the Steamtown operation in North Walpole NH was a Blount?

Andre

Last edited by laming

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×