Skip to main content

 

During a repair of this Atlantic legacy the brown wire on the left hand connector. (White and brown wire came out) I believe it went to the extreme left side of the connector. But, something has me confused. The white wire goes to pin 2 of the motor driver board (See top photo ) next to the blue wire. It is connected to 2 places on the RL mother board via a tap into the wire. I know this is right.

 

The brown wire that fell out appears to go to the AC REG. I pinned out the 2 free pins of the connector they seem to go to motor driver forward and reverse.  The spot on the connector where I assume the brown wire fell out ohms out to pin 19 on the RL.  The  white wire  ohms out to pin 17 on the RL.

 But, I'm a bit confused by the brown wire going to the AC REG and connecting to pin 19. Help! Is the brown wire in the right spot?

 

 

 

 

 

 

 

WP_20170623_23_54_23_ProWP_20170623_23_54_07_Pro

Attachments

Images (2)
  • WP_20170623_23_54_23_Pro
  • WP_20170623_23_54_07_Pro
Last edited by shawn
Original Post

Replies sorted oldest to newest

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×