Skip to main content

Replies sorted oldest to newest

GN Man, that could be done but you will need a different RCMC board as the one in the non powered unit does not support motor operation.  It would be costly and you need to be a Lionel tech just to get most of the parts.  I have just about all the Late issue Lionel E-8 diesels and the two motors will pull just about anything you want to put behind it.   Good post Alex to give the guys a look under the hood.  The Lionel E-8 is very well done.

Last edited by Marty Fitzhenry
The GN Man posted:

Good videos, Alex, thank you. From the second video it looks like adding motors to the unpowered A units would not be too difficult. Am I correct about that?  I have the CB&Q E9 and GN E7 A-A sets and they could both use a power upgrade....

It's not impossible, but you would need to change the trucks to powered ones and of course need two motors and hardware, along with wiring. Also one motor would need speed control   

Alex 

 

 

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×