Skip to main content

75 replies

Announcing the Spring 2015 Legacy Users Group Meeting Agenda in pdf added!

MartyEMartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER

LUG Spring 2015

The Lionel Legacy Users Group

 

Friday April 24th 2015   7:30AM to 8:45AM

Breakfast at 7:30... discussion begins at 8AM

 

Alexander's Family Restaurant

840 Carlisle Road

York, PA 17404  (717) 846-1041

 

One block from the fairgrounds rear entrance.

Downstairs banquet room (Ask for Paula)

 

The Lionel Legacy Users Group is not affiliated with Lionel Trains in any way other than sharing the enjoyment and trading of information related to operating the Lionel Legacy System.

 

Breakfast will be served from a selected menu of choices at a nominal fee.  Gratuity and cost of breakfast is the responsibility of each individual. While we don't require you to sign up, please give us a heads up that you are coming if possible.  The room is limited but so far we've only had standing room once.

 

 

 

Please feel free to start placing Legacy related questions, suggestions, and thoughts in this thread.  We will pass them on to Jon Z and Lionel to get the answers.  Please make sure that they are clear and to the point so that Jon and his team can give us the best possible answer.  While I understand some of the questions we get can be answered by the group of folks that post here, I owe it to the people who participate to pass all questions to Jon and Lionel for them to reply and ask that we refrain from commenting and answer questions posted here for Lionel.

All questions will be due in on Monday April 13th to allow Jon and the Lionel team time to answer them.  Please try to get them in before then.

 

 

Please refer all product questions outside of Legacy to the Lionel folks at the booth. 

 

 

We are anticipating having a couple of new items to show.  I will also be bringing the LCS demo board, new 3.1 Version LCS iPad App with layout sharing, iCab, and LSU for those who wish to see them.  While possibly not specifically addressed during the meeting, they will be available afterwards to check out.

 

As always we will end at 8:45AM sharp for those wanting to get to the York meet.  I will be available afterwards if folks want to discuss or check anything out. We can also show how to make the upgrade modules using LSU.  Version 1.53 will be on hand. Will Allen will help. Bring 2 writable modules. 

 

We once again anticipate video taping the meeting.

 

Thanks to Paula and Alexander's for our meeting place.

 

 The Legacy Users Group would especially like to thank Jon Zahornacky, Mike Reagan, Rudy Trubitt, Phil Hull and the entire Lionel team for their continued support.

 

A special thank you to the Legacy users for sharing your experiences.  We all learn a great deal from each other and that is what its all about.

 

Your Legacy Users Group Hosts are Will Allen, Chris Bojanower, and Marty Eibeck.

 

Attachments

Hide
Images (1)
  • LUG Spring 2015
Files (1)
Last edited by MartyE
Original Post

Replies sorted oldest to newest

MartyEMartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER

All questions will be due in on April 13th to allow Jon and the Lionel team time to answer them.  Please try to get them in before then.

 

Also again just a friendly reminder, please make sure they are clear and to the point.  I try to send them "as is" so I don't miss anything.  The clearer they are the more correct answer will be received back.

Last edited by MartyE
MartyEMartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER

I added this to the top post but wanted to call attention.

 

Legacy 1.53 is available.  Will Allen will be happy to show and help you make 1.53 system modules.  If you would like to take advantage of this please bring along 2 writable black modules or the GRJ modified modules.  Will can walk you through the process on how to create the modules.

MartyEMartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER
I'll see what I can do.  I'll see if I can get a uncouple track.  Unfortunately the demo board is a little compact so I'll see what accessory we can do.  Do you have something specific in mind for an accessory?
 
Originally Posted by ricking:

Question:

 

Can you demo the correct wiring to connect multiple uncoupling tracks and/or other accessories to an ASC2 module?

 

i will attend. 

 

T T4TTOGR Forum Member

Hi Marty,

Thanks for putting this event  onn, I wish I could attend.

 

Question:  When in Train Link Mode and viewing/operating the linked cars in the train, can the software be modified so that the velocity knob, horn/whistle slider and the train brake operate the engine in that train?  Does that make sense?

MartyEMartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER
I'll have to check the answers from last year but I thought they would look into that. Being said its on the list to see if there is an update.
 
Originally Posted by T4TT:

I ask every year but I would like the Cab Interior On/Off button to be a master switch.  For example when button is in the Off position the cab light will not come on when the engine stops or reverses directions.  Switching moves look silly with the cab light constantly going on and off IMHO.

 

rickingrickingOGR Forum Member DIGITAL SUBSCRIBER
I wanted to see how 2-4 uncoupling tracks would get wired to a single ASC2.
 
 
Originally Posted by MartyE:
I'll see what I can do.  I'll see if I can get a uncouple track.  Unfortunately the demo board is a little compact so I'll see what accessory we can do.  Do you have something specific in mind for an accessory?
 
Originally Posted by ricking:

Question:

 

Can you demo the correct wiring to connect multiple uncoupling tracks and/or other accessories to an ASC2 module?

 

i will attend. 

 

 

MartyEMartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER
10-4
 
I'll probably have to put this in a document of some sort.  Right now I only have 1 ASC2 and it's currently wired to a switch.  Let me do some work and see what we come up with.  One way or another we'll get you an answer.
 
 
 
 
Originally Posted by ricking:
I wanted to see how 2-4 uncoupling tracks would get wired to a single ASC2.
 
 
Originally Posted by MartyE:
I'll see what I can do.  I'll see if I can get a uncouple track.  Unfortunately the demo board is a little compact so I'll see what accessory we can do.  Do you have something specific in mind for an accessory?
 
Originally Posted by ricking:

Question:

 

Can you demo the correct wiring to connect multiple uncoupling tracks and/or other accessories to an ASC2 module?

 

i will attend. 

 

 

 

Next

Add Reply

Views: 2,309
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×