Skip to main content

Hey guys,

Working on a different project that came from the MTH auction fairly intact.

It's a PS3 Dreyfuss that was undecorated / unfinished. After fixing up a couple bad wires, it actually works almost perfectly in conventional. This was one of the lucky ones that came fully stocked with all electronics and details.

The only thing bothering me is that the chuff is around 10x per revolution. I don't know if that's something that persists in conventional after being programmed in DCS, but since I have no DCS setup I'm stuck in conventional.

Is there anyone who knows a secret combination of bells and whistles to create a slower chuff rate? FWIW I've already done a successful reset, which was the last thing I need to do before I could fire up and run conventional.

Here a video

Attachments

Videos (1)
20210509_201712
Last edited by Jeff_the_Coaster_Guy
Original Post

Replies sorted oldest to newest

I was afraid of that.

One last thought: what if I created a new tach tape that has stripe spacing that's 10/4 further apart?  Would that adversely affect motor speed?

Otherwise, anyone in Cincinnati area care to meet up and play with trains for a bit?

Yes, that would adversely affect the motor speed.

A conventional reset of the engine won't reset the chuff rate, you need to do a feature reset with a DCS system. I'd be more than happy to help you out if I was closer!

@JohnActon posted:

Complete your DCS system. I held off on purchasing a TIU and Remote but finally bit the bullet about four years ago and am very glad I did.         j

John, I know it's been a while, but I've finally heeded your advice!

I was able to learn the features and after troubleshooting some hardware in the engine, chuff sounds great now thanks to my new DCS system.

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×