Watts is watts. So genurally what goes in is the same as what comes out minus losses. In the case of the CW 80, it is listed as 80 watts, so the input is 80 watts or about .65 amps at full load. Is it possible to get more? Yes, but not by much. Apply a small amount for error an you could probably run 12 to 14 of them on a standard 14 amp house circuit.
Actually, I believe the CW-80 is rated at output watts, not input watts. Older PW transformers were indeed rated by input watts. I suspect the CW-80 would be closer to 100 watts input power at full load.
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!