Hello Friends,
Ok i am completely puzzled and disgusted at the same time, I never had this happen to me but here goes. I have a old very good working ZWR and a New ZW with 2 power packs that are working fine when fooling around with a plain oval fastrack but when i completed my track 8' x 16' and was ready to test the track out both transformers keep going out, and resetting with no signs of life on any of my engines that i used to test track and i have no ideas why this is happening to me when i have used both transformers/controllers and trains before.
I do have also not pictured is 5 prewar switches set up using fastrack transition tracks and O Gauge pins but once again this isn't rocket science to set up a fastrack and 2 ZW Old & New several times before and to get to this conclusion for nothing to work no power no train lights and all both ZW Transformers just power for 5 seconds the green light turns bright and link the breaker pops and the zw red light goes on and then the power resets, keep in mind besides the switches being set up i have nothing else hooked up yet , no signals, no crossing guards, nothing except fastrack switches a right and a left and 4 prewar switches so this has me puzzled and disgusted to come this far to stop in m y track and not figure out what is going on with not 1 but both transformers (zw).
I haven't needed to take any pictures of my new ZW with 2 power packs so that's why it's not listed.
I would gladly listen to any help, input you can give me.
Thank You so Much.
