Several years back I posted that in using the Mini-2 from ERR that while using it with the Legacy Cab 1 L doing consists or lash-ups the headlights in the engines and the operation of the Sound Commanders, the use of horn and bell did not operate correctly. Jon "Santa Fe Fan" stated in a reply.
"Ray,
I was able to duplicate the issue here. It seems that because the Cab1-L is sending out extra commands for sound system control that are for legacy locos, the Mini Commander 2 software is unable to process the TRain assignment. I will investigate the Mini Commander 2 code, but that of course does not help your setup. Sorry.
I am not sure when I can implement a fix, but it may take a while due to my schedule. In general, the Mini Commander 2 is designed for small vehicle control and small locos. Lash-up considerations for this sort of application are quite minimal. Basically, I consider this concern a low priority."
I am at this time wondering if a fix has been done, or what remedy may be available? I realize that ERR stated the Mini-2 was designed for small O gauge locomotives but in American Flyer, small by comparison is pretty much our standard road engine.
Thank you
Ray
