I would like to know what the Mini-2 threshold voltage is, the lowest voltage it puts out to the motor.
Thanks
Ray
Original Post
Replies sorted oldest to newest
I suggest a voltmeter and a bench test. 
The voltage will also be dependent on what the input power is, there is no regulation of the voltage for the MC-II.
If your testing concludes it's excessive, just add some diode pairs in one motor lead to adjust the starting voltage.
I know the threshold on my Power masters is about 2.5 volts. I have motors that start below 1.5 volts so maybe the diodes will do the trick to smooth out the starting of these motors.
Ray
Yep, just keep adding diode pairs (back to back) in series with the motor until you achieve the desired result.
