I have a Legacy K-4 that has an issue. The cab light is blinking 3 times which indicates a smoke unit problem.
The manual tells me to do a reset. I found the logos (open ended wrenches) in the Legacy instruction manual, but
I can not find them. Could someone give me the click path so I can reset the engine?
Thanks.
Russ Boersma
Replies sorted oldest to newest
The "Reset" button is the "R" on the keypad.
My problem is that I can not find the "reset" in the Legacy handheld. The instruction manual does not tell me how to (click path) find the symbols (reset # 1 is a horizontal open end wrench).
Russ Boersma posted:My problem is that I can not find the "reset" in the Legacy handheld. The instruction manual does not tell me how to (click path) find the symbols (reset # 1 is a horizontal open end wrench).
Reset is not an open end wrench. Can you tell us the product 6- number and where you are seeing the open ended wrench info? The only open ended wrench symbol is for the breakdown units.
Press the circle-R on the keyboard. A power cycle will also clear it until it's sensed again.
Access to this requires an OGR Forum Supporting Membership
