Skip to main content

Just replaced a PS-2 board in a premier NYC L4b 4-8-2. It is a stock PS-2 replacement board. Loaded the file off the web and everything works correctly with the exception of the quilling whistle. The whistle icon shows on softkey #1 like it should, but when I press the thumbwheel and scroll no sound. Did I load the sound file wrong, that it is supposed to be a flash file? I am using version 5.0 DCS and I thought it would load a flash file automatically. What am I doing wrong?  

Original Post

Replies sorted oldest to newest

OK, thanks for the info 9943, Casey and Marty. I ordered the PS-2 replacement after MTH sent notice that they are no longer pre-loading replacement boards, and forgot to specify I was going to need a flash processor. Does MTH have separate part numbers for standard and flash processor boards?Just answered my own question, there is........duh!

Last edited by Chuck Sartor

Yes, AE-0000014.  Unfortunately MTH is out of stock.  Some reworked boards may be available soon.  Check the processor chip on the board, if it "DOES NOT have the MTH logo, the board is a flash type and you could send it to MTH for flashing.

I do have one flashed for quillable whistle if you have an exchange flash board.  G

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×