Help ordering a capacitor for r2lc 06

1. KEMET ESK107M6R3AC3AA

Digikey

Well, if that cap blew, it's unlikely that more stuff didn't get zapped.  Getting the pins misaligned is bad news as a rule.

Carl, thank you so much! Exactly what I needed. I looked for a good while and found the correct brand, watts and voltage, but none were the right size. Just ordered. I always appreciate the help from this forum and all the time everyone takes.

Thank you,

Chris

Hi John, I'm also afraid of that. I think the pins may be what happened. I saw one that looked out of place. Really not sure what happened.  I looked all boards over and this is all my untrained eye could find. Do you think I would be alright to try this?

Thanks,

Chris

To follow up: I replaced the capacitor, but as was expected it did not help. I wanted to thank everyone for their help. I don't know if I just damaged the R2LC 06, or other parts of the TMCC components. It is completely dead in TMCC and conventional. Thanks,

Chris

Bummer, but not really a surprise.  I misaligned a RS4 board once, it was fireworks, and there was no coming back.

I'll certainly be much more careful from now on. Thanks,

Chris

This was on a 6-28016 from 1999. Would a cruse commander M be what I need to fix this? Thanks,

Chris

Why not just get another R2LC board?  I think I have some C07 code ones here, just may have to swap headlight wires.  A C08 would work well too, and you may find more available.

Here is a list of past R2LC code info posted by Mikado many moons ago.

C04 (early modular TMCC locos and command ready modular boards)
C05 (used exclusively in the Lionel Backshop)
C06 (used in the later TMCC steamers (such as the later semi scale pacifics and hudsons, after the whole motherboard issues were corrected)
C07 (used initially in the C-420's only, but then used by licensees)
C08 (the most common, produced in the largest number, compatible with all aftermarket upgrade boards, this is the board pretty much everyone uses; Atlas O, 3rd Rail, Weaver, K-Line (even the new SD70MAC's!, etc. the C08 board is also the one that will be sent to anyone who orders an R2LC from either us or DD.)
C11 (used in newer RS 5.0 locos with Odyssey)
C13 (U33 now the most current R2LC, used in all new production Lionel stuff with RS 5.0 and Odyssey)

Jim

Hi Jim, I guess I thought I had to replace everything? Which I can't afford to do now.  I also thought I had to use a 06 or a 08. But I don't know?  If you have a R2LC that will work I would very much like to purchase that, if you think that will do it. Should I contact you through your profile voice mail? Thank you,

Chris

I just found and bought a R2LC. Thank you everyone for taking time to guide me. I'll be sure to follow up after I receive it.

Chris

I want to thank everyone here on this Forum! And a special thanks to gunrunnerjohn! My engine is now running perfectly. Thanks to all the great people on this Forum, and your willingness to help.

Chris