Skip to main content

Hi, I am having trouble getting my switches to operate with the SC-2 controlled by the CAB-1. They were working fine then stopped.  The switches are wired for 14 volts with an old Lionel 1034 transformer. It appears that the SC-2 is receiving the wireless signal since the red light on the SC-2 blinks when the CAB-1 signal is transmitted. If I place a jumper across the post screws on the SC-2 the switch operates. The transformer is old and the actual voltage is a bit below 13.

A newer Fastrack switch, the one that doesn't need the SC-2  operates correctly with the CAB-1.

Any suggestions would be appreciated.

Original Post

Add Reply

Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×