I have a P&P control tower and water tower. How would I adapt them to my tubular layout? I have also a LCS Sensor Track on the layout. Would they daisy chain to that or is there some other way?
Original Post
Replies sorted oldest to newest
@Dave 69 GTEL posted:I have a P&P control tower and water tower. How would I adapt them to my tubular layout? Either cut off the Plug and Play cord end and wire normally, or buy a mating adapter cable 6-82038 with the p&p socket -as seen in this topic https://ogrforum.com/...-and-play-connectors
http://www.lionel.com/products...power-cable-6-82038/
I have also a LCS Sensor Track on the layout. Not germane to the situation
Would they daisy chain to that or is there some other way? NO! The LCS PDI cable system has nothing to do with plug and play or accessory power.
@Vernon Barry posted:
I don't like cutting wires. I see that plug power cable was last cataloged in 2016. I'm sure they don't make it anymore. I'll try to find it on eBay or maybe Gryzboski's got it. What are you supposed to do, drill some big hole in your layout to feed the male end of the plug underneath it? Thanks for your help.
Sorry, correction. This thing is available all over the place!
