Skip to main content

 I have a legacy NYC F7 ABBA. Each unit is programmed 84,85,86,87. When lashed up th rear a unit has the green marker lights and head light on. And when reversed both lights go out. Should not the head light come on along light the markers  in reverse and then in forward goes out with the red markers coming on . What am I doing wrong.

Original Post
David, The rear a unit in the consist is not set as starting in reverse. If you are using Legacy go back to the train "build" screen and change the loco at the end of the consist (furthest loco to the left) and press "dir" so the nose of the loco is facing to the left, then press set. The green markers will come on, but the red markers will not. The red markers are driven off the same output as the rear light, since in lash up mode the rear lights are off the markers are off (the red ones only) the green markers are driven by the front light output. If you still don't get it give us a call at 586-949-4100 ext 2. Mike Lionel
Post
×
×
×
×
Link copied to your clipboard.
×
×