Lionchief Hogwart's Missing Chuff

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I have a LC Hogwart's set that has no chuff. I checked the continuity of the Sound ON/OFF switch to the board, so it's getting the sound enable command. I 'scoped the optical chopper signal coming to the board, and the 5V signal is making it all the way to the board with a nice clean signal. Other than the actual logic board, is there any other thing that could prevent the chuff from being recognized? All the other audio features work, horn, bell, crew-talk, etc. Bluetooth or LC remote work fine.

8/1/223:03 PM

❤️ 0

Original Post

Replies sorted oldest to newest

BenLMaggiOGR Forum Member

I blame He who should not be named...

8/1/223:22 PM

❤️ 3

SteveHOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

John, in the LC App there are 4 individual volume slider controls. One for each type of sound: Whistle, Bell, Announcements, and Chuff.

In the app, click the speaker Icon. That will bring up the different sound options.

8/1/223:45 PM

❤️ 0

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Already checked, they're at full volume.

8/1/223:51 PM

❤️ 0

SteveHOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Since this sounds like it could be a logic issue, in the interest of trying everything short of replacing the board, did you try lowering and then raising the chuff volume slider in the app?

Is there a reset/reload/reflash that can be performed on these boards?

Maybe try holding your wand in the other hand. laugh