I have a 5133 switch missing a binding post nut. I have tried 022 switch nuts, 4-40, 6-32, and metric m3 & m4. None fit. Does anyone know what kind of thread is on this thing. Apparently they where made in China (from other forum posts), so I though metric would work, but no go.
Replies sorted oldest to newest
If the 88-2 nut specified for the 022 & 5133 does not fit, it's probably this one:
6SP5122077
TERMINAL NUT / 4 mm x .7 thd
https://www.lionelsupport.com/...-Hand-Switch-6-14062
Thank you Rob. Turns out that since I read that this vintage 072 was made in China, I tried both M3 & M4. Neither one works. I can only assume it's some kind of pitch difference. But I can order a couple 88-2's and see if they work.
Ken
If it is China built, 88-2 will not work. They are 4-36 thread. Order the p/n Rob posted.
Access to this requires an OGR Forum Supporting Membership
