Lionel does not have a parts breakdown of the smoke unit in this unit. It is the 2 piece unit. The fan housing detaches from the smoke element housing. There is also no gasket on this unit. Any help would be appreciated. I assume it is a 6 ohm unit. semi smart.
Replies sorted oldest to newest
Look up 6101224200 and see if that is what you have.
John
Are you the same Shawn that was on the forum about 6 years ago and worked for a train shop?
Chuck Sartor posted:Are you the same Shawn that was on the forum about 6 years ago and worked for a train shop?
Well, had a couple of friends in the business...But, never worked for any.
Lionel Parts posted:Look up 6101224200 and see if that is what you have.
John
Thanks, that unit is different. I locate a similar unit under the heading of semi smart smoke unit. I know the resistor so 6 ohms. But, was looking for a smoke motor number to determine if I had one in my spare parts inventory. Thanks for the help!
looks like there's room for either the horizontal or diagonal mount motor.
If you have about 1/8" of extra space below the motor, the MTH smoke motor will also work.
Ok, Frame replaced...Boy, this beast is tight! Now, if someone can help me. There is a stud on the rear truck. I have a conical spring. 2 washers one larger then the other. Plus, a aluminum spacer and a C clip. What direction does the conical spring face? Which washer goes where. Where does the aluminum spacer go?
Access to this requires an OGR Forum Supporting Membership
