Skip to main content

I purchased a Lionel Acela set with add on cars last Spring. I keep having issues with it running intermittently. It's programmed into my Legacy CAB controller and the sound etc,,, work perfectly. However, when trying to run it won't budge. I then power down and wait about 15 seconds. I power it up and it works. If I stop it and put it into reverse, it again will not budge until I power off and back on again. The rails are clean and the center contact rollers are down and making contact (the lights and sounds work). HAs anyone else experienced this problem? It is very annoying, especially when attempting to show my friends my "Great New" set. Thanks in advance

Nest regards for a Happy, Healthy and Safe 2023 to all.

Original Post

Replies sorted oldest to newest

I purchased a Lionel Acela set with add on cars last Spring. I keep having issues with it running intermittently. It's programmed into my Legacy CAB controller and the sound etc,,, work perfectly. However, when trying to run it won't budge. I then power down and wait about 15 seconds. I power it up and it works. If I stop it and put it into reverse, it again will not budge until I power off and back on again. The rails are clean and the center contact rollers are down and making contact (the lights and sounds work). HAs anyone else experienced this problem? It is very annoying, especially when attempting to show my friends my "Great New" set. Thanks in advance

Nest regards for a Happy, Healthy and Safe 2023 to all.

From my reading here, the Acela is plagued by many mechanical problems. This one sounds electrical, like maybe a board that is overheating or a wire that is partially shorted.

My recommendation is that you should file a warranty case with Lionel, and or get a replacement from the dealer since you only have a few months left on your warranty.

Add Reply

Post
This forum is sponsored by Lionel, LLC
×
×
×
×
Link copied to your clipboard.
×
×