Does anyone know of any internal drawings for the Playground? (Swings, See-Saw, & Merry-Go-Round). I have one and the See-Saw doesn't work, took it a part and it looks like it is missing a piece. Been trying to figure out what it may look like. Checked everywhere I can think of and the best I come up with is User Manual.
Item Number 6-24138, or 6-82104,
Thanks for any help.
Replies sorted oldest to newest
Mine worked fine when I tested it out of the box. Installed it on my layout and it worked for 5 minutes then nothing. I did make sure I'm getting 14 volts going to it.
Anyone else having problems?
I had one of these to repair, I tested the motor after unplugging it and the motor was OK. I used a small soldering iron to make sure there were no cold solder joints on the board (carefully), and it actually started working again. Must have been a lucky day!
Access to this requires an OGR Forum Supporting Membership
