Hello I would like to add a err cruise commander and railsounds into a lionel f 3 engine 6-31944b from the older grand central limited train set. What components would I need and would this be a easy install.
Replies sorted oldest to newest
I see that your post has no replies, this may get you started. I am not familiar with your locomotive but if it has a can motor all you would need are:
Cruise Commander (Ver. 4.1) or and ERR Diesel RailSounds F3/F7 series The motor board will depend on what your engine came equipped with from Lionel If your locomotive has an open frame motor it would need to be replaced with a can motor or the option would be to use the AC Commander and forget about cruise control. You may now get replies from folks here more familiar with your equipment than me. Ray |
Here's the 6-31944 F3 parts listing. It has can motors, so the ERR Cruise Commander and the ERR RailSounds Commander (F3-F7) would be the pieces you need. You'll be stripping all the existing electronics, and the installation is pretty simple and well documented in the ERR Documentation.
Thanks John, I thought this got overlooked.
Ray
@Rayin"S" posted:Thanks John, I thought this got overlooked.
I did get overlooked. I don't recall seeing it.
Go to 3rdrail.com and you can order direct a cruise commander and the F7 sound board. That is all you need as far as components.