Lionel Saw Mill 2301 Maintenance Instructions

Joe KOGR Forum Member

I have an original, new in box Lionel 2301 sawmill. When I hook it up to AC power, there is the motor sound with no action. I took off the plastic cover, and the conveyor belt moves intermittently. This has been in storage for a long time. There are no maintenance instructions included in the box.

I think I should lubricate something, however I am not sure what and where to lubricate. I searched the web and could not find the Lionel maintenance manual.

Any ideas on how to get this great operating accessory up and running would be appreciated.

thanks:

3/14/165:53 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Joe KOGR Forum Member

After some more testing, It appears the accessory needs at least 10VAC to operate. It ran better at 12VAC.

Is there any lubrication required to keep it running well?

Thanks:

3/14/166:30 PM

❤️ 0

ADCX RobOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Do not lubricate the 464/2301. It will only cause problems. The only exception I can think of would be to very lightly treat the pulley axles with powdered graphite.

3/14/167:20 PM

❤️ 0

Ron StevensonOGR Forum Member

my current lumber mill sticks, so the log belt runs intermittently. Even when the cover is off, the belt is hesitant/stops. It seems that the two log transport fixtures cause enough friction to make the belt slip, even without the logs running.

Suggestions.?

7/20/1612:10 PM

❤️ 0

CLICK HERE and Subscribe to the OGR YouTube Channel!

Lionel Saw Mill 2301 Maintenance Instructions

Add Reply

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!