Hello,
Sorry basic question, does the Lionmaster Legacy T1, 6-11207, use its handrails as antenna?
I've heard of that on other locomotives but unsure for this model.
I have the opportunity to purchase one for a decent price, but the front stanchion is broken off (wire is still there but loose), I want to make sure that won't impead operations.
Also, are the stanchions available for sale somewhere to correct the below issue?
Thanks so much!
Miller
Replies sorted oldest to newest
Always post as much technical info when asking a question- example Lionel or other brand product number.
I think you mean this one 6-11207
http://www.lionel.com/products...duplex-5511-6-11207/
then you take that same product number, go over to support and look up the product part information- exploded diagrams, and other details.
https://www.lionelsupport.com/...-4-4-T-1-Duplex-5511
And yes, the different height stanchions are available for you to purchase from Lionel parts and support.
The 6-11207 is the LionMaster version.
You are correct, it is 6-11207. To attach the new stanchions, would super glue be sufficient or is a different attachment method required?
They just press in no glue at all. If you have to use glue- I guess you could use superglue and recommend hitting with a catalyst accelerator to instant cure it it and not get any white film from the fumes.
A trick with CA adhesive that dispenses with the accelerant. The accelerant is sometimes damaging to paint, but an apparently little known trick with CA adhesive is water! CA cures in the absence of air, and if you wet a surface and then with CA on the mating surface put them together, they will cure instantly, just like using the accelerant. The plus is you don't risk clouding anything with the accelerator spray. I use this all the time when I'm using CA adhesive, my accelerant just sits in the tray now.
Access to this requires an OGR Forum Supporting Membership
