I am trying to set up the MTH "burning farmhouse" for an impending visit from my grandson. There are two wires which makes the connection fairly straight forward, But...I can't find an on/off switch. For any of you who have this accessory, how do you turn it on and off? Thanks, Paul
Replies sorted oldest to newest
Single pole single throw switch. Install switch on side of the lighting circuit. Out of Transformer into switch out of switch to one terminal of building. From the other terminal of said building run another wire back to the other poll of the transformer.
Basically the building light is wired directly to the output of the transformer with the switch on one leg so as to open and close the circuit loop. You can control all other action you so desire as long as you stay within the wattage rating of said transformer.
Thanks, that is helpful. I do find it strange that no switch was include. Moreover, there are no operating instructions either in the manual or on line. No kudos to MTH on this one. Paul
Access to this requires an OGR Forum Supporting Membership
