Hi,
I have the above engine, it was running perfect. I created a lash-up with 2 other MTH engines with the above engine leading. All ran fine for days. At one point the train stalled at a switch, I thought I had a derailment, hit the stop everything button. Fixed the problem, lash-up could not be found. Deleted the lash-up & engines re-entered 2 of the 3 engines, DCS could not find the GP-35. I did a recover engine, found it, ran it, unable to get the marker lights & strobe to function. Did a factory reset, all OK. Tried to re-create the lash-up, unable to locate the GP35.
I set up a dedicated track with just a transformer, the engine ran fine conventionally. Added a TIU into the set up. All I get are the usual messages, no engine to add, out of RF range, etc. Tried a recover engine, no go. Removed the TIU & re-set the engine to factory settings, 1 horn, 5 bells. Horn blasted twice confirming a reset. Still unable to enter into the remote after reconnecting the TIU. I even switched the DCS/polarity switch a couple times.
Any suggestions?
Thanks,
Joe
Original Post
