Anyone know if possible to replace broken marker/classification light on engine?
thanks
|
Anyone know if possible to replace broken marker/classification light on engine?
thanks
Replies sorted oldest to newest
Well, if you go to Lionel support and enter the product number 6-11117
https://www.lionelsupport.com/...tive-only-6101117001
CE0000005 | CLASS LAMP LEDS / GREEN / 2 LEDS / ASSORTED WIRE LENGTHS / MICRO MINIATURE | $7.00/ea |
My fault, should have searched for parts at Lionel for the green LEDs.
https://www.lionelsupport.com/...MP%20LEDS%20%20GREEN
I thought they were all out but I was wrong.
ok thanks... i guess wasn't looking for the right name...
Oh one more... how about the front coupler for that? says unavailable...
...and if the housing doesnt come with lens, where do you find that?
thanks
@davido1224 posted:...and if the housing doesnt come with lens, where do you find that?
thanks
You either call Lionel support, or email them.
or you search for a part name
https://www.lionelsupport.com/...=class%20lamp%20lens
And then scroll through pages hoping to find it.
@davido1224 posted:Oh one more... how about the front coupler for that? says unavailable...
There are tons of dummy couplers for engines, and many of them are the same. Ditto for the scale couplers.
so a coupler like this would be ok?
Worst come to worst, you might have to file that end if it's too thick to slip into the slot.
and it still looks like the right side has some sort of "lens"...very tiny-ish
i guess i'll give them a call to see...
Yep, I looked at my Atlantic and it has a clear lens. Some others models don't have any lens in the class lights.
Access to this requires an OGR Forum Supporting Membership