Skip to main content

Hey Guys,

In taking apart my locomotive to fix an audio problem (the sound board was dislodged), I found that a part inside the engine compartment was broken. I went to the Lionel web site to look at the exploded parts diagram for the locomotive, and the part that is broken isn't even shown there - at least I can't make it out. I've attached a picture of the part - with a pencil pointing to it. There is a screw that screws into the top of this part - but that no longer engages the part as it is broken.

Can anyone tell me the part number I would need to order? Could I repair this with crazy glue or Bondic? Assuming that Lionel's web site shows the parts they can supply, since the part is not shown there, I won't be able to get it from them. Anyone else I could get it from? 

Attachments

Images (1)
  • lionel new: Broken part
Original Post

Replies sorted oldest to newest

Jeff,

It looks like the antenna standoff.  Unfortunately they're out of stock.

However, it's simply a piece of plastic rod with appropriately-sized holes drilled in each end.  Since you have the broken one can you fashion a new one to match it, approximately, out of rod stock (styrene, lucite, etc.)?

This might be more than you were hoping for ...

Mike

Attachments

Images (4)
  • mceclip0
  • mceclip1
  • mceclip2
  • mceclip3

Add Reply

Post
This forum is sponsored by Lionel, LLC
×
×
×
×
Link copied to your clipboard.
×
×