Pilot / step location on new Lionel GP-30 ???

dorfj2OGR Forum Member DIGITAL SUBSCRIBER

The front steps / pilot appear to be set back under the frame / platform on some of the recently released GP-30’s - is this by design ?

Not sure if this has something to do with being able to install scale couplers etc ? - can you move the pilot forward ?

Online photos of some models show the steps and platform lined up perfectly - others have the steps set back considerably

Not a criticism just a curious observation - most online reviews are really favorable / everyone seems to like them 👍🏼

Thanks in advance

Joe S

12/11/2110:22 AM

❤️ 0

Original Post

Replies sorted oldest to newest

romiller49OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I have a Legacy GP30 from the original run. My steps were not in alignment either. I looked at each truck and the pilots were spaced differently on each truck. I switched the trucks around and everything was perfect. There definitely is a front truck and a rear truck. Obviously they were mounted incorrectly at the factory.

12/11/2110:37 AM

❤️ 0

dorfj2OGR Forum Member DIGITAL SUBSCRIBER

Thanks Rod - I have an early GP-30 also and the trucks/steps/frame line up and seem fine - interesting

12/12/2110:01 PM

❤️ 0

Catonsville Central RailwayOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

If these use the same two-axle trucks Lionel has been using for a while, you should be able to see two sets of mounting holes on the underside of the trucks for the pilot to connect to. I believe the front pilot should be on the outer mounting holes and the rear should be on the inner mounting holes to line-up on the GP30.

12/13/2112:09 PM

❤️ 0

CLICK HERE and Subscribe to the OGR YouTube Channel!

Pilot / step location on new Lionel GP-30 ???

Add Reply

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!