I recently acquired the engine above. Before I run them I like to pop off the shell and take a look at what's going on or has gone on in the smoke unit!
The manual that came with this engine doesn't show anything for removal of the shell. I've removed two from each end (4 total) and it's obvious there is something in the middle that still needs to be removed.
Anyone know which other ones need to be removed?
Thanks!!
Replies sorted oldest to newest
Probably the fuel tank screws
@SPSF posted:Probably the fuel tank screws
Thanks but nope. Those screws are real "shorties" just for the tank. I did remove two more at the rear of the front trucks for a total of six now removed. Front of the shell is starting to lift. There are two more at the rear trucks on the center side of the engine, but they are a bit inaccessible under the truck.
Access to this requires an OGR Forum Supporting Membership
