Using a Post war ZW transformer with a rating of 275W (I know it really doesn't put out that much). My question is, does each side produce 275W or is it cumulative? I want to run two separately powered loops. Can it be done by one or will I need a separate transformer? I have another VW as well as a KW.
Rick
Replies sorted oldest to newest
Postwar ZW is 275W input power. Output is around 180w-200W, dived among 4 channels.
Yes, you can run two separate loops. I have done it, using A and D, handles.
ZW is 250/275W input power, Output is 190-200W continuous. Any or all of the output is available from any handle as they share a common secondary, totaling up to the limit.
@ADCX Rob posted:ZW is 250/275W input power, Output is 190-200W continuous. Any or all of the output is available from any handle as they share a common secondary, totaling up to the limit.
So, if I want maximum power on each loop, I should use two transformers?
@El Tejon posted:So, if I want maximum power on each loop, I should use two transformers?
Do you need 10-11 amps per train? Then yes, a separate transformer for every power district on every layout would be ideal, but there are diminishing returns, and cost & space considerations to look at when planning out larger layouts.
Access to this requires an OGR Forum Supporting Membership
