Guys. Planning to obtain a ps2/3 board with 5volt connectors. To replace this dead board. I have seen ps3 rs27 engines with smoke units. I wonder how they did it? See my shell. Anybody have a ps3 rs27 that can show me how it's done? It won't have the battery. So I thought well maybe it fits around there. And new board is not as tall.
Replies sorted oldest to newest
Chris,
Actually, if the battery comes out and the smaller (I believe) diesel PS3 board is positioned a bit differently, it appears that there's physical room enough for a smoke unit.
I am going off memory here but the early PS-1 RS had a smoke unit with a plastic tube to get it in position. Not a lot of room, and since your going to use a PS-32 board, while no battery, you have a bigger foot print than the 5V board. I think the small smoke unit attached to the roof of shell may work, but the board clearance will be critical. G
Access to this requires an OGR Forum Supporting Membership
