I’m onto my next project for my B&M wreck train. Starting to plan out extra details and such. One of the things I’m thinking of is adding a smoke unit. First time doing something like this. So for those of you who have added smoke units before. Other then room what things do I have to look out for. Second who sells smoke units, mind you I’m running legacy. Any help is greatly appreciated.
here’s the start of the wreck train. 
Replies sorted oldest to newest
I'd probably consider something like the MTH HO smoke unit, it's small and will put out enough smoke for this task. I've put a few of these in a caboose. I supply the power with a AC-DC switching power module, and use some diode drops to provide lower voltage to the fan motor.
John half of that made no sense to me, electrical is not my strong suit. I did a quick search and found this one. Not sure if this will work less wires for my to screw up. Says it can do 14-16 volts. Will wire in a switch, this isn’t something that will be running all the time. 
If you put more than 16 volts on that one, they don't last too long. I think that's why Williams, Weaver, and 3rd Rail back in the day all used the 6V Seuthe smoke unit and a regulated board. If you want to go that way, I have a few of the 6V Seuthe smoke units.
I will send you a email later tonight John.
Access to this requires an OGR Forum Supporting Membership
