I have two Weaver CNW Yellow Jackets, supposedly one with Railsounds/TMCC and one without, but both have these unexplained switches on the tender. The instruction manual doesn't mention them.
Can someone speak to their purpose? They suggest TMCC but the labels are not the usual PGM-RUN and CMD-CONV.
Thanks
Replies sorted oldest to newest
Can't see picture. Please try again.
That's the photo, just the middle bottom of tender with the two switches "Signal On<>Off " and "Run On<>Off" It's visible to me in post and in your reply here.
Will paste again in case some problem at the other end:
Thanks
Run and off probably the run program switch. The signal is usually full railsound and signal sounds only (bell whistle). Try it. You can also run into the cruise switch. G
Access to this requires an OGR Forum Supporting Membership
