Skip to main content

3 replies

Testing a TMCC equipped loco with a traditional transformer

BT big trainOGR Forum Member

Hi all,

I have several 3 rail tmcc equipped locos that I would like to test.  But I don't have any 3 rail track, power supplies, or command systems.  The locos were purchased with the intent of converting them to 2-rail at some point.  A fellow division member has offered to help me test the engines, but only has a traditional Lionel transformer for power, no tmcc.  

Can I test the tmcc locos with a regular transformer without damaging anything?  At least to see if they run?  I presume that added features like sound or lights will be limited with the tmcc controller, if they function at all.

Any tips would be appreciated.  I don't want to ruin any of the electronics in these models.

Thanks,

Jim

Original Post

Replies sorted oldest to newest

BT big trainOGR Forum Member

Thanks for the help Gregg.  I was able to test the engines.  We were using some sort of vintage Lionel transformer.  I could get engine sounds and lights, but could only get the horn to sound on one engine.  I don't know if that is a product of the controller or the power applied to the track.  It's fine either way.  All units are used and I will indicate the details if I try to sell them.

Jim

Add Reply

Views: 321
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×