thanks for both your help finished my last engine tonight! Would not store it's last engine address, and i had put a new battery and 3 volt board, everything worked perfection except i would shut the engine 686 battum 6200 engine down and turn off power to TIU, when i powered up again it had lost the address in the engine for DCS. After i had checked everything i could think of new battery good voltage ,engine running ok on all features only had the issue as previous mentioned. After a quick call to George,he said sounds like something wrong with the battery and to try on conventional, well he was right on conventional as soon as i shut the engine off sound stopped immediately.Since i new the 3 volt board was brand new,did not even have any sound files in the board until i installed the up load to the engine!
Well the problem turned out to be a broken Black wire in the engine, 10pin connector back of the engine!
Soldered the wire back in the appropriate spot and wellllla!back to storing and holding the engine Address again
Thanks to George and John for there expertise!
Alan Mancus
