Skip to main content

Yesterday I got a package delivery from Charles Ro. I had to think a while at work to figure out what it was. 

lionel40ft trailer pack001

When I got home, it was the pre-ordered Lionel 40 ft. Scale trailer twin packs.

lionel40ft trailer pack002

Opening up one of the packages, I see some great detailing on these trailers... from the paint to the "landing gear"

lionel40ft trailer pack003

The Mud Flaps are made of rubber just like the scale 30' tractor trailers done last year.

Lionel even modeled the embedded Air line hook ups and electrical connection

lionel40ft trailer pack004lionel40ft trailer pack005

Lionel included a second set of ends with Opening doors. Unfortunately there are NO instructions on how to remove the "closed door" rear and replace with the "open door" rear. It appears one has to pry them off [ that's not good engineering] without damaging them.

lionel40ft trailer pack006

Below one can see the tiny plastic nibs that hold the end to the trailer wall. I don't see these lasting long of someone attempts to do the swap. Lionel should have taken a que from their diesel locos with the removable hatch and used those N50 magnets to hold the rears onto the trailer.

lionel40ft trailer pack007

Here is a pick of the underside. There is a nice ribbed floor, scale trailer hitch pin, a rectangular underslung reefer unit? and the trailer bogies.

Notice no air diaphragms for the trailer brakes that one would see bolted to the trailer axles.

lionel40ft trailer pack008

Ok lets compare to other trailers in O gauge. Below [from L to right] we have a Pecos River Brass Trailer from the 1980's. It's a SCALE 40'. Next is the K-line ATSF "scale 40'-really 38ft" trailer with the more modern stamped steel wheels. and finally the Lionel "40 ft- really 37.5ft" trailer.

lionel40ft trailer pack009lionel40ft trailer pack010lionel40ft trailer pack011

Below is a pic of the K-line[rear] vs. Lionel in Trailer Length.

lionel40ft trailer pack012lionel40ft trailer pack013

At least the Lionel Kingpin and Landing gear wins in scale fidelity hands down from most the O gauge mfgs to this point. Not even the AMT 1:43 kits from the 1980's have landing gear this detailed.

lionel40ft trailer pack014

So here's the skinny so far:

  • Pros: Great paint job and  
  • some great add on details.

Cons :   

  • NOT Scale Length! [here was an opportunity missed to be scale and "differentiate" their product with other mfg's!]
  • Light Weight- lighter than the 027 [s gauge] trailers!
  • No instructions on how to swap the closed end with the open end. 

I will have to get back to everyone to see how these trailers sit on various flat cars and TOFC equipement. I hope you at least enjoy and comment on the above pics for now.

Attachments

Images (14)
  • lionel40ft trailer pack001
  • lionel40ft trailer pack002
  • lionel40ft trailer pack003
  • lionel40ft trailer pack004
  • lionel40ft trailer pack005
  • lionel40ft trailer pack006
  • lionel40ft trailer pack007
  • lionel40ft trailer pack008
  • lionel40ft trailer pack009
  • lionel40ft trailer pack010
  • lionel40ft trailer pack011
  • lionel40ft trailer pack012
  • lionel40ft trailer pack013
  • lionel40ft trailer pack014
Last edited by prrhorseshoecurve
Original Post

Replies sorted oldest to newest

I will add onto Marks thread.

 

I was excited about these trailers, and wish Lionel would sell just the 20' 'pup' trailers as well, I don't need tractor cabs and that is the only was that it seems they are available.

 

Mark, I am going to go out on a limb and say that the box underside is a toolbox, since on the PFE/BAR the reefer units are shown at the front.

Lionel 40' trailer

IMG_3825

Lionel 20' pup trailer - smooth side 

IMG_3826

Lionel 20' pup - ribbed 

IMG_3827

Lionel 20' and 40'

IMG_3829

 

IMG_3828

Lionel from fore to aft - Lionel 20', Lionel 40', Weaver 35', Atlas 45' 

IMG_3830IMG_3831IMG_3832IMG_3833

Pictured on a Lionel PS-4 50' flat 

IMG_3834

Lionel pup

IMG_3835

Lionel 40'

IMG_3836IMG_3837

Atlas O pines 45'

IMG_3838

Attachments

Images (14)
  • IMG_3825
  • IMG_3826
  • IMG_3827
  • IMG_3829
  • IMG_3828
  • IMG_3830
  • IMG_3831
  • IMG_3832
  • IMG_3833
  • IMG_3834
  • IMG_3835
  • IMG_3836
  • IMG_3837
  • IMG_3838

First, thanks to prrhorseshoecurve for this thorough review.

Second, and I hate to say it, but there's a typo on the BAR trailer. It's AROOSTOOK, not AROOSTOCK.

This is the second time Lionel did this on these trailers! There's a B&O that's supposed to have the word COORDINATED on it. Unfortunately, they printed CORRDINATED.

This sort of thing actually bothers me more than the trailer being a couple feet short. I edit a lot of text in my day job and I can't turn it off.

prrhorseshoecurve posted:

Yesterday I got a package delivery from Charles Ro. I had to think a while at work to figure out what it was. When I got home, it was the pre-ordered Lionel 40 ft. Scale trailer twin packs. "the Lionel "40 ft- really 37.5ft" trailer."

lionel40ft trailer pack011

So here's the skinny so far:

  • Pros: Great paint job and  
  • some great add on details.

Cons :   

  • NOT Scale Length! [here was an opportunity missed to be scale and "differentiate" their product with other mfg's!]
  • Light Weight- lighter than the 027 [s gauge] trailers!
  • No instructions on how to swap the closed end with the open end. 

I will have to get back to everyone to see how these trailers sit on various flat cars and TOFC equipement. I hope you at least enjoy and comment on the above pics for now.

Brand new tooling and it is 2.5' short of scale?

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
CONTACT US
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×